The best way to apply thermal paste is with a small brush. You can also use a cotton swab or even your finger, but these methods are not as effective.
Step 1: Clean the surface of your Best GPU
Before you apply thermal paste, make sure that both the thermal pad and the Best GPU itself are clean. This will help ensure that the paste adheres properly. The easiest way to do this is to wipe both surfaces with an alcohol pad or rubbing alcohol — just make sure it’s completely dry before proceeding.
Step 2: Apply a thin layer of thermal paste to the thermal pad
Next, apply a thin layer of thermal paste to one side of the copper core on your new high-temp paste package (also known as HIC). Don’t worry about getting too much; this excess will just be wiped off with a rag later in the process.
How To Apply Thermal Paste To GPU
First, turn off the PC and remove the power cord from the wall.
Secondly, remove your pc case side panel. Thirdly, locate the graphics card and identify its fan.
Fourthly, clean off the thermal paste from the fan’s base.
Fifthly, apply a pea-sized droplet of thermal paste on the clean surface of the GPU.
Sixthly, hold your hand over your pc case and reinstall your side panel.
Seventhly plug in your machine and power it up.
Finally, play a game for a few minutes and check your temperatures using CPUID HWMonitor or another monitoring tool to ensure that they’re lower than before.
Takeaway: You can apply thermal paste to GPU in 8 steps!
Final Words
It’s time to apply the thermal paste on your GPU, but don’t be too rough with it. Start by slowly spreading it out over the surface of the GPU and begin to slowly place the heatsink on top of it.
The heatsink will only fit if you’re applying pressure to spread out the thermal paste evenly across the GPU. Don’t worry about getting some on your Best Motherboard, as a little bit won’t hurt anything.
Leave a Reply