You can improve your computer’s overall performance by overclocking your processor or graphics card. You can also overclock your monitor. Overclocking a monitor increases the refresh rate How To Overclock Your Monitor.
Which can improve the smoothness of the overall experience. This article will cover how to overclock your monitor and the benefits and risks that go along with it.
How To Overclock Your Monitor
Overclocking Your Monitor: Risks
Before we get started, it is best to understand your equipment’s limitations and any unwanted risks that come with overclocking. Before overclocking anything, check your warranty to see if doing this will void it.
In some cases, it will. Overclocking won’t cause too much harm to your monitor, but if it isn’t covered by the warranty, then be aware you are continuing at your own risk.
Overclocking the refresh rate on your monitor rarely damages the internal hardware. High-end gaming monitors sometimes come with this option, so be on the lookout for one of these when you consider a newer monitor.
The primary risk of overclocking is that it will reduce the life expectancy of the monitor. While the lifespan will not be greatly affected, an increase in refresh rate requires a faster current which will increase power output.
This can drain more power from your power supply and create more internal heat, which can wear down components over time.
Overclocking Your Monitor: Benefits
Understanding the benefits is just a matter of understanding what a refresh rate is. Your monitor’s refresh rate indicates how many times per second the image is refreshed and often 60Hz is enough.
However, with higher-powered graphics cards come higher frame rates. When your GPU’s frame rate does not match the refresh rate of your monitor (60Hz + 120 FPS), you can experience a screen tear that produces jittery gameplay.
To eliminate this problem, increase your refresh rate to match as close as possible with your frame rate.
Overclocking using Nvidia
Regardless of which graphics card you have in your setup, overclocking is similar. We will outline both below. The process of overclocking your monitor is relatively easy.
To begin, navigate to your Nvidia control panel and open it by right-clicking on your desktop. Once open, you should be on the “Change Resolutions” page.
After that, you can click the “Enable Resolutions Not Exposed by the Display” option, and then click “Create Custom Resolution”. Once the refresh rate is set, do not change it. Instead, increase the amount by 5 Hz at a time.
Most monitors can go up to around 15 Hz. However, it is possible that higher refresh rates are available depending on your GPU, connection type (HDMI/DisplayPort), and monitor capabilities.
Overclocking using AMD
To set a custom refresh rate for AMD cards, go to the Radeon Settings menu and click on “Create” under “Custom Resolution.” It does not matter if you have an AMD or Nvidia card; you should still only increase the refresh rate in steps of 5 Hz.
Increase it until the signal is lost and the screen reverts back to a refresh rate it can use, then go up in increments of 1 Hz to maximize the refresh rate.
When you overclock your monitor, be sure to go slowly. The temptation is to speed up the process, but that’s how things break. If you do it correctly, you’ll soon find yourself enjoying an even better viewing experience than before.
If you have any questions about how to overclock your monitor, leave them in the comments below and we’ll help you out!
Get Best Buyer’s Guide